Best sellers

Tube and threaded accessory

White rubber cable gland - size depending on version

Passe-cable-blanc

€0.25

White rubber grommet, size according to selected version

Nut and washer

low zinc-plated nut for M12 tube, 1mm pitch, 5mm thick

écrou-zinc-M12-5mm

€0.28

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

Brass hexagon nut for M10 threaded tube, 1mm pitch

Tube and threaded accessory

Brass hexagon nut for M12 threaded tube, 1mm pitch

Ecrou-laiton-M12

€0.60

The low brass nuts are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

Silicone colour filter

Sootylight silicone filter with white rim for GU10 or MR16 LED bulbs

Sootylight-Spot-blanc

€1.95

Anti-glare light diffuser with a "frosted" appearance - no small dots of light visible.

Threaded tube M8 length from 1 to 10 cm an accessory for luminaire

Tube and threaded accessory

Threaded tube M6 1mm pitch length from 1 to 10 cm an accessory for luminaire

DIY-058-M6

€0.23

Hollow threaded rod sold individually in M6 standard with 1mm fine pitch for fixing bulb sockets. Choose the length you need from our range, available in this advert in lengths from 1cm to 10cm.

Column, tube, ball, luminaire tip, suspension ring

7.5mm diameter brass ball with M4 non-through thread

DIY103229001-M4-Ø7.5mm

€0.60

7.5mm diameter solid brass ball with M4 thread for assembling hollow polishing rods

Double-circuit toggle or rocker switch with screw terminal block

Electrical socket and switch

On / On toggle or rocker switch for in-and-out circuits screw terminal - chrome Gold

inter à levier-va-vient-12L-or

€6.60

Lamp power switch with lever knob

Ring, hook, ball joint and spring

Bulb holder rear spring ring for GU10 or MR16 spotlights

Anneau-ressort-back-gu10mr16

€0.50

Spring for holding bulbs in GU10 or MR16 spotlights

Tube and threaded accessory

Threaded tube in stainless steel 304 diameter M10 - length from 1 to 10 cm depending on...

Tube-M10-inox

€1.30

Standard M10 threaded tube in 1 mm increments - choose the length you need from the range.

Sockets, multipliers, risers, adapter sockets

G9 porcelain lampholder on M10 support with threaded ring

Douille-G9-M10-bague

€4.13 €4.26

Time left

This G9 lamp holder makes it easy to install small G9 light sources in luminaires.

MR16 porcelain lampholder with autogrip connection to bare wire

Sockets, multipliers, risers, adapter sockets

Porcelain lampholder for MR16 or G4 lamps with autogrip connection on bare wire

culot-MR16-autogrip

€0.85

MR16 base on bare wire in G4 or GU5.3 format for halogen or LED lamps.

Cable clamp, cable fastener, screws, interlock button

Black nylon strain relief clevis for round cable

chape-anti-trac-noir-rond

€0.25

This accessory is ideal for hanging lights from your ceiling.

Cable clamp, cable fastener, screws, interlock button

White nylon suspension clevis, anti-pull cable lock

chape-bloc-blanc

€0.25

This accessory is ideal for hanging lights from your ceiling.

Mini G4 bakelite base for LED or halogen bulbs

Sockets, multipliers, risers, adapter sockets

Mini G4 bakelite base with cables for LED or halogen bulbs

Mini culot-G4-30CM

€0.80

A mini G4 bakelite base on a bare wire for G4 halogen or G4 LED bulbs.

Plastic insulating sleeve for cable entry on E27 socket

Brass and bronze creation for luminaire

Plastic insulating sleeve for passing electrical cable inside an E27 lamp socket

DIY200-ISOL-E27

€0.30

Generally used inside an E27 lampholder to protect cables from contact with metal parts

0.3mm² coaxial electric cable on transparent Teflon, 1m long

Round electric cable

Coaxial electrical cable on transparent Teflon with two 0.3mm² conductors

cable-coax-0.3mm²

€2.59

Two-core coaxial electrical cable with 0.3 mm² wires - length in 1 metre increments

Gold-coloured, zinc-plated hexagonal nut for M10 threaded tube

Tube and threaded accessory

Gold-coloured electro-galvanised steel hexagonal nut for M10 threaded tube

Ecrou-zingué-M10-OR

€0.25

Gold-coloured, zinc-plated steel nuts are perfect for assembling luminaires and lighting fixtures mounted on M10 hollow rods.

Column, tube, ball, luminaire tip, suspension ring

12mm diameter brass ball with 1mm pitch M6 non-through thread

DIY103229017-M6-Ø12mm

€1.00

12 mm diameter solid brass ball with M6 thread for assembling hollow rods for chandeliers

Hexagonal bichromated steel sleeve with M10 thread

Tube and threaded accessory

Hexagonal socket in dichromated steel, tapped for M10 electrical tube - Height 25mm

Manchon-M10-bichr-25mm

€1.00

This hexagonal bichromated steel sleeve is perfect for assembling M10 hollow rods.

2x0.3mm electrical cable on transparent Teflon

Round electric cable

Round electrical cable with two 2x0.3mm² conductors on transparent PVC sheath and...

cable-2x-0.3mm

€2.33 €2.40

Time left

Transparent two-core electric cable with 0.3mm² wires - length in one-metre variations

Single-core electrical cable with Teflon sheath

Electrical cable with Teflon sheath, conductor cross-section 0.3mm², choice of colours

cable-teflon-1C-0.3

€0.65

PTFE Teflon electric cable with 0.3mm² wires - length in 1 metre increments

Natural white fake chandelier candle 100mm

Lighting and lighting design

Dummy candle D24 for chandelier natural white colour length 100mm

bougie-blanc naturel-100-D24

€1.20

D24 faux candle sleeve in natural white with imitation candle wax drippings.

Threaded tube M12 length 3 to 10 cm an accessory for luminaire

Tube and threaded accessory

Threaded tube M12 1mm pitch length 3 to 10 cm an accessory for luminaire

DIY-058-M12

€0.30

Hollow threaded rod sold individually in M12 standard with 1mm fine pitch for fixing bulb sockets. Choose the length you need from the range available in this advert in lengths from 3cm to 10cm.

0.5mm² coaxial electric cable on transparent Teflon, 1m long

Round electric cable

Coaxial electrical cable on transparent Teflon with two 0.5mm² conductors

cable-coax-0.5mm²

€3.10

Two-core coaxial electrical cable with 0.5 mm² wires - length in 1 metre increments

M10 thin tube in galvanised steel - from 15 to 60 millimetres for G4 base lamps

Tube and threaded accessory

M10 thin tube in galvanised steel, length from 15 to 60 millimetres for G4 cap lamp

M10-fin

€0.20

Hollow threaded rod sold individually in M10 standard with 1mm fine pitch for fixing small G9 lamp sockets. Choose the length you need from 15 to 60 millimetres.

Electric cable clamp, brass, M10 thread.

Brass and bronze creation for luminaire

Brass electrical cable clamp with M10 threaded cable gland

serre-cable-laiton-presse-M10

€2.60

Brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

threaded brass ring for M10 tube 13mm diameter

Nut and washer

M10 brass threaded ring, diameter 12mm, height 20mm

DIY092-205023

€1.25

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Sockets, multipliers, risers, adapter sockets

Mini G4 bakelite base for LED or halogen lamps

Mini culot-G4-bakelite

€0.50

A mini G4 bakelite base on a bare wire for G4 halogen or G4 LED bulbs.

Nut and washer

Low zinc-plated nut for M12 tube, 1mm pitch, 3mm thick

écrou-zinc-M12-3mm

€0.20

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

Tube and threaded accessory

Black rubber cable gland - size depending on version

Passe-cable-noir

€0.25

Black rubber grommet, size according to selected version

Sockets, multipliers, risers, adapter sockets

Adapter socket - E14 to E12

EF-E14-E12

€1.90

Easily convert your E14 socket to an E12 base in an instant with this adapter socket

Home

C5W LED filament shuttle bulb 41 mm long

Auto CW5-fil-41mm

€2.50

This C5W LED filament shuttle bulb replaces your original 41mm long shuttle bulb, and is simply installed in place of the original shuttle.

G45 4 watt LED globe bulb with B22 base and four filaments

B22 LED bulbs

4-watt G45 LED globe bulb with B22 base - four dimmable filaments - polyethylene globe

G45 -4W-B22-dim-plas

€5.60

Filament bulbs are back, now with standard dimensions

M10 threaded tube, length from 11 to 20 cm an accessory for bulb sockets

Tube and threaded accessory

M10 threaded tube in galvanised steel, length from 11 to 20 cm an accessory for luminaire

DIY-059

€1.00

Hollow threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets. Choose the length you need from our range, available in this advert in lengths from 11 to 20cm.

Electrical cable, Protective sheath

Pre-wired electrical earth cable on round cable lug diameter 4mm - length 200mm

DIY218-0.5-T-cosse-M4

€0.75

Sockets, multipliers, risers, adapter sockets

Mini G4 bakelite base Custom cable lengths

Mini culot-G4-bakelite-sur-mesur

€1.10

A mini G4 bakelite base on a bare wire for G4 halogen or G4 LED bulbs.

Showing 37-72 of 2211 item(s)