Best sellers

Ring, hook, ball joint and spring

Bulb holder rear spring ring for GU10 or MR16 spotlights

Anneau-ressort-back-gu10mr16

€0.50

Spring for holding bulbs in GU10 or MR16 spotlights

Single-core electrical cable with Teflon sheath

Electrical cable with Teflon sheath, conductor cross-section 0.3mm², choice of colours

cable-teflon-1C-0.3

€0.65

PTFE Teflon electric cable with 0.3mm² wires - length in 1 metre increments

Brass hexagon nut for M10 threaded tube, 1mm pitch

Tube and threaded accessory

6-sided brass nut for M10 threaded tube, 1mm pitch, 2 mm thick

Ecrou-laiton-M10-e2mm

€0.40

Low brass nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

MR16 porcelain lampholder with autogrip connection to bare wire

Sockets, multipliers, risers, adapter sockets

Porcelain lampholder for MR16 or G4 lamps with autogrip connection on bare wire

culot-MR16-autogrip

€0.85

MR16 base on bare wire in G4 or GU5.3 format for halogen or LED lamps.

Mini G4 bakelite base for LED or halogen bulbs

Sockets, multipliers, risers, adapter sockets

Mini G4 bakelite base with cables for LED or halogen bulbs

Mini culot-G4-30CM

€0.80

A mini G4 bakelite base on a bare wire for G4 halogen or G4 LED bulbs.

Tube and threaded accessory

Black rubber cable gland - size depending on version

Passe-cable-noir

€0.25

Black rubber grommet, size according to selected version

Gold-coloured, zinc-plated hexagonal nut for M10 threaded tube

Tube and threaded accessory

Gold-coloured electro-galvanised steel hexagonal nut for M10 threaded tube

Ecrou-zingué-M10-OR

€0.25

Gold-coloured, zinc-plated steel nuts are perfect for assembling luminaires and lighting fixtures mounted on M10 hollow rods.

0.3mm² coaxial electric cable on transparent Teflon, 1m long

Round electric cable

Coaxial electrical cable on transparent Teflon with two 0.3mm² conductors

cable-coax-0.3mm²

€2.59

Two-core coaxial electrical cable with 0.3 mm² wires - length in 1 metre increments

Hexagonal bichromated steel sleeve with M10 thread

Tube and threaded accessory

Hexagonal socket in dichromated steel, tapped for M10 electrical tube - Height 25mm

Manchon-M10-bichr-25mm

€1.00

This hexagonal bichromated steel sleeve is perfect for assembling M10 hollow rods.

M10 thin tube in galvanised steel - from 15 to 60 millimetres for G4 base lamps

Tube and threaded accessory

M10 thin tube in galvanised steel, length from 15 to 60 millimetres for G4 cap lamp

M10-fin

€0.20

Hollow threaded rod sold individually in M10 standard with 1mm fine pitch for fixing small G9 lamp sockets. Choose the length you need from 15 to 60 millimetres.

2x0.3mm electrical cable on transparent Teflon

Round electric cable

Round electrical cable with two 2x0.3mm² conductors on transparent PVC sheath and...

cable-2x-0.3mm

€2.40

Transparent two-core electric cable with 0.3mm² wires - length in one-metre variations

Column, tube, ball, luminaire tip, suspension ring

12mm diameter brass ball with 1mm pitch M6 non-through thread

DIY103229017-M6-Ø12mm

€1.00

12 mm diameter solid brass ball with M6 thread for assembling hollow rods for chandeliers

Natural white fake chandelier candle 100mm

Lighting and lighting design

Dummy candle D24 for chandelier natural white colour length 100mm

bougie-blanc naturel-100-D24

€1.20

D24 faux candle sleeve in natural white with imitation candle wax drippings.

Home

C5W LED filament shuttle bulb 41 mm long

Auto CW5-fil-41mm

€2.50

This C5W LED filament shuttle bulb replaces your original 41mm long shuttle bulb, and is simply installed in place of the original shuttle.

Electric cable clamp, brass, M10 thread.

Brass and bronze creation for luminaire

Brass electrical cable clamp with M10 threaded cable gland

serre-cable-laiton-presse-M10

€2.60

Brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

Sockets, multipliers, risers, adapter sockets

Adapter socket - E14 to E12

EF-E14-E12

€1.90

Easily convert your E14 socket to an E12 base in an instant with this adapter socket

Threaded tube M12 length 3 to 10 cm an accessory for luminaire

Tube and threaded accessory

Threaded tube M12 1mm pitch length 3 to 10 cm an accessory for luminaire

DIY-058-M12

€0.30

Hollow threaded rod sold individually in M12 standard with 1mm fine pitch for fixing bulb sockets. Choose the length you need from the range available in this advert in lengths from 3cm to 10cm.

Sockets, multipliers, risers, adapter sockets

Mini G4 bakelite base for LED or halogen lamps

Mini culot-G4-bakelite

€0.50

A mini G4 bakelite base on a bare wire for G4 halogen or G4 LED bulbs.

0.5mm² coaxial electric cable on transparent Teflon, 1m long

Round electric cable

Coaxial electrical cable on transparent Teflon with two 0.5mm² conductors

cable-coax-0.5mm²

€3.10

Two-core coaxial electrical cable with 0.5 mm² wires - length in 1 metre increments

threaded brass ring for M10 tube 13mm diameter

Nut and washer

M10 brass threaded ring, diameter 12mm, height 20mm

DIY092-205023

€1.30

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Cable clamp, cable fastener, screws, interlock button

Anti-pull electric cable lock - rotation on M10 threaded tube

DIY197-02541

€0.45

Anti-pull electric cable lock - rotation inside a lamp socket

Brass and bronze creation for luminaire

Notched brass washer for M10 threaded tube for lighting fixtures, external diameter 13mm

DIY101215003-M10

€0.75

M10 brass notched washer, 2mm thick, used in the construction of chandeliers and luminaires

M6 x 20mm socket headless stainless steel screw with nylon tip

Cable clamp, cable fastener, screws, interlock button

M8 stainless steel socket headless screw with nylon pressure stud

vis-inox-nylon

€1.92

M8 stainless steel screws for luminaire assembly

Electrical cable, Protective sheath

Pre-wired electrical earth cable on round cable lug diameter 4mm - length 200mm

DIY218-0.5-T-cosse-M4

€0.75

Nut and washer

Low zinc-plated nut for M12 tube, 1mm pitch, 3mm thick

écrou-zinc-M12-3mm

€0.20

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

M10 threaded tube, length from 11 to 20 cm an accessory for bulb sockets

Tube and threaded accessory

M10 threaded tube in galvanised steel, length from 11 to 20 cm an accessory for luminaire

DIY-059

€1.00

Hollow threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets. Choose the length you need from our range, available in this advert in lengths from 11 to 20cm.

Tube and threaded accessory

Brass adaptor M10 male to female spout pitch

adapt-M10/M-PDB/F

€1.95

Small brass adaptor M10 male to female spout pitch

Cable clamp, cable fastener, screws, interlock button

Anti-pull electric cable lock - rotation on M10 threaded tube E27 lamp base

DIY195-SDI27

€0.45

Anti-pull electric cable lock - rotation inside a lamp socket

G45 4 watt LED globe bulb with B22 base and four filaments

B22 LED bulbs

4-watt G45 LED globe bulb with B22 base - four dimmable filaments - polyethylene globe

G45 -4W-B22-dim-plas

€5.43 €5.60

Time left

Filament bulbs are back, now with standard dimensions

low stainless steel nut for M8 tube with 1mm pitch

Tube and threaded accessory

low stainless steel nut for M8 tube, 1mm pitch, 4mm thick

écrou-inox-M8-4mm

€0.45

The low stainless steel nuts are perfect for assembling light fittings and chandeliers mounted on M8 hollow rods.

Porcelain bases for G9 lamps on M20.8MM sockets

Sockets, multipliers, risers, adapter sockets

G9 porcelain lamp base for claw support

culot-G9-sur-douille

€1.10

G9 porcelain lampholder for steel base with retaining claws.

Sockets, multipliers, risers, adapter sockets

Mini G4 bakelite base Custom cable lengths

Mini culot-G4-bakelite-sur-mesur

€1.10

A mini G4 bakelite base on a bare wire for G4 halogen or G4 LED bulbs.

Cable clamp, cable fastener, screws, interlock button

Anti-pull electric cable lock - rotation on M10 threaded tube E14 - E27 lamp socket

DIY194-SDI14

€0.44

Anti-pull electric cable lock - rotation inside a lamp socket

Cable clamp, cable fastener, screws, interlock button

Round brass terminal - earthing terminal on M10 threaded tube

DIY219-Borne-terre-M10

€0.80

Domed washer Ø 30mm colour for luminaire / M10 threaded lamp socket

Tools and assembly accessories

30mm diameter domed washer for M10 threaded luminaire - colours in 9 variations

Rondelle-bombé-Ø30-

€0.60

Domed washers with a diameter of 30mm. Choose the colour you need from the range.

17.5mm diameter cable locking clevis two anti-pull cable claws

Cable clamp, cable fastener, screws, interlock button

17.5mm diameter cable locking clevis with two anti-pull cable claws - white nylon

chape-anti-trac-griffe-17.5-P

€0.45

This accessory is ideal for hanging your lights.

Silicone colour filter

Sootylight silicone filter with salmon-coloured rim for GU10 or MR16 LED bulbs / Warmer...

Sootylight-Spot--saumon

€1.95

This salmon-coloured silicone filter added to a GU10 or MR16 bulb in warm white 3000 Kelvin lighting colour will increase the amber nuance of this lamp in the same way as 2700 Kelvin halogen bulbs.

2x0.3mm electrical cable on transparent Teflon with stainless steel support cable

Electrical cable on transparent sheath

Round electrical cable 2x0.3mm² on transparent Teflon with stainless steel support cable

cable-porteur-2x-0.3mm+1-TP

€2.95

Two-wire electrical cable, with 0.3mm² wires plus suspension cable - length in one-metre variations

Power cable and extension lead

Plug or socket 230 volts 2 poles - 2.5 amps colours white or black

prise-mâle-230V-2 P 2.5A

€2.40

Socket for 230-volt high-power electrical equipment

Brass reducer for electric threaded tube

Tube and threaded accessory

Reducer for brass electrical threaded tube size according to variant

Réduction-laiton

€1.49

Reducer for electrical brass tube, internal/external thread - choice of dimensions

Bulb with G4 base Tube14 leds SMD 3020 - voltage 230 volts

G4 LED bulbs

Bulb G4 base Tube 12 LED of 2 watts SMD 2835 - 12 volts

STG456

€1.62

Minimal size for maximum efficiency, this G4 format 12 volt LED tube bulb takes up the same amount of space as halogen bulbs.

Zinc-plated serrated washer for M4 threaded tube

Nut and washer

M4 fan washer with internal teeth type JZ in galvanised steel

Rondelle dentelée M4

€0.06

This fan lock washer is particularly suitable for assembling luminaires fitted with a socket on a hollow stem.

Lampholder and base

Black plastic socket with double clamping rings for E27 base bulb

EFDSC002-P-E27 double bag-noir

€2.96

E27 lampholder in self-extinguishing black plastic with double screw ring for incandescent, halogen or low-energy lamps,

2x0.5mm electrical cable on transparent Teflon with stainless steel support cable

Round electric cable

Round electrical cable 2x0.5mm² on transparent Teflon with stainless steel support cable

cable-porteur-2x-0.5mm+1-TP

€3.60

Two-wire electrical cable, with 0.5mm² wires plus suspension cable - length in one-metre variations

E10 LED bulb for DC 12 volt control cabinets

E10 LED bulbs

E10 base LED bulb for 12 volt DC control cabinet - 0.2 watt

A-LED E10-12v

€4.90

This 12-volt bulb is designed for use in electrical cabinets.

M10 knurled brass plug, diameter 18mm with Ø 4mm hole

Brass and bronze creation for luminaire

18 mm diameter M10 knurled brass plug with Ø 4 mm hole for light fittings

DIY100209040

€1.10

Decorative brass stopper used in the construction of brass chandeliers or light fittings.

Brass ring nut for threaded tube M10 diameter 13mm

Nut and washer

Brass ring - nut diameter 13mm for M10 threaded tube

DIY101215002-laiton-M10-13mm

€0.80

Brass bushes are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Lampholder and base

E14 porcelain mini socket on M10 hollow threaded rods

mini-Douille-E14-M10

€3.90

E14 porcelain socket with support for M10 hollow threaded rods

Showing 49-96 of 2265 item(s)