Best sellers

Threaded tube M10 length from 1 to 10 cm an accessory for bulb sockets

Tube and threaded accessory

Threaded tube M10 in galvanised steel length from 1 to 10 cm an accessory for luminaire

€0.09

Hollow threaded rod sold individually in M10 standard with 1mm fine pitch for fixing bulb sockets. Choose the length you need from the variations available in this advert in lengths from 1cm to 10cm.

Tube and threaded accessory

Low zinc-plated nut for M10 tube, 1mm pitch, 4mm thick

écrou-zinc-M10-4mm

€0.16

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Zinc-plated serrated washer for M10 threaded tube

Nut and washer

Zinc-plated serrated fan washer for M10 threaded tube

Rondelle dentelée M10

€0.15

This fan lock washer is particularly suitable for assembling luminaires fitted with a socket on a hollow stem.

Tube and threaded accessory

Brass hexagon nut for M10 threaded tube, 1mm pitch

Ecrou-laiton-M10-e3.5mm

€0.42

Low brass nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Tube and threaded accessory

Plastic end cap to protect electrical cable for M10 threaded tube

embout-plas-m10

€0.20

Plastic end cap to protect electrical cable for M10 threaded tube

Tube and threaded accessory

Low zinc-plated nut for M10 tube, 1mm pitch, 3mm thick

écrou-zinc-M10-3mm

€0.15

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

low zinc-plated nut for M10 tube, 1mm pitch, 2.2mm thick

Tube and threaded accessory

Low zinc-plated nut for M10 tube, 1mm pitch, 2mm thick

écrou-zinc-M10-2mm

€0.14

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Ring, hook, ball joint and spring

Two-arm spring clamp on M10 rod, size depending on declination

Ressort-deux

€0.90

100mm to 120mm diameter spring for all recessed luminaires.

Tube and threaded accessory

Reducer for electric threaded tube in galvanised steel size according to variant

Réduction

€0.54

Reducer for internally/externally threaded electrical pipe in galvanised steel - choice of dimensions

G4 bakelite with self-grip connection on bare wire

Sockets, multipliers, risers, adapter sockets

Mini G4 bakelite cap with Autogrip connection on bare wire

culot-G4-bakelite-autogrip

€0.75

A mini G4 bakelite base on a bare wire for G4 halogen or G4 LED bulbs.

Lamp and luminaire support

Silicone protection washer for M10 screw, external diameter depending on version

Rondelle-silicone

€0.60

Tube and threaded accessory

Threaded insert for M10 tube, 1mm pitch

Insert fileté-M10

€0.41 €0.42

Time left

Self-tapping sockets ideal for assembling light fittings and chandeliers mounted on M10 hollow rods.

Tube and threaded accessory

Plastic protection ring for bulkhead passage - diameter depending on version

Bag-plast-

€0.18

Transparent plastic grommet for bulkheads.

Flat brass washer, thickness 2mm, diameter 20 to 90mm

Screw, nut, threaded tube and plug, sleeve, washer, reducer

M10 brass washer for light fittings - diameter 20 to 100mm

DIY101-laiton

€0.72

Brass washer, thickness 1.5-2mm, used for the construction of brass chandeliers or light fittings.

Tube and threaded accessory

Zamac serrated nut for M20.8mm threaded ring with 2mm pitch

écrou-bague-M20,8

€0.95

Zamac serrated nut for assembling luminaires and lighting fixtures mounted on G9 or G4 lampholders.

low stainless steel nut for M10 tube with 1mm pitch

Tube and threaded accessory

low stainless steel nut for M10 tube, 1mm pitch, 6mm thick

écrou-inox-M10-6mm

€0.55

The low stainless steel nuts are perfect for assembling light fittings and chandeliers mounted on M10 hollow rods.

Brass and bronze creation for luminaire

M6 threaded decorative brass ball cap nut for lighting fittings

DIY095-204004

€1.10

Decorative Ø 10mm ball-shaped brass cap nut used in the construction of brass chandeliers or light fittings.

Sockets, multipliers, risers, adapter sockets

G9 caps with threaded support for M10 tube

culot-G9-M10

€2.20

This base for a G9 bulb is designed to be connected to a luminaire fitted with an M10 tube.

Tube and threaded accessory

Brass hexagon nut for M8 threaded tube, 1mm pitch

Ecrou-laiton-M8

€0.39

The low brass nuts are perfect for assembling light fittings and chandeliers mounted on M8 hollow rods.

Cable clamp, cable fastener, screws, interlock button

Smooth cable clamp, choice of colours, cable passage diameter 6.8mm

Serre-câble-lisse-6.8mm

€2.00

Greenhouses with lamp cables and chandelier pavilions

Cable clamp, cable fastener, screws, interlock button

M3 dichromate-plated steel screw, oval-head, cross-head, any length, depending on version

vis-acier-m3-cruci

€0.28

M3 dichromate-coated steel screws for luminaire assembly

Ring, hook, ball joint and spring

Three-arm spring clamp on M10 rod size according to declination

Ressort-3-bras

€1.32

Spring diameter 100mm to 210mm for all recessed luminaires.

Tools and assembly accessories

M10 zinc-plated sleeve with 1mm pitch hex base - 25mm long

DIY-manchon-zingué-M10-25mm

€0.40

Hollow sleeve sold individually, standard M10, 1mm fine pitch, 25mm long.

Sockets, multipliers, risers, adapter sockets

Crimp connector for bakelite G4 base

Connecteur-sertir-G4

€0.05

Crimp plug for G4 bakelite base on bare wire for G4 format bulbs.

Lighting and lighting design

False candle holder D24 E14 socket for M10 threaded tube height depending on declination

Support fausse bougie e14

€1.20

D24 dummy candle holder on E14 socket for M10 threaded tube, perfect for assembling candle lighting.

Ring, hook, ball joint and spring

Retaining spring on threaded socket for GU10 base, E12 and E14 sockets or luminaire...

ressort-douille

€2.10

Retaining spring on threaded bushing

Column, tube, ball, luminaire tip, suspension ring

6mm diameter brass ball with M3 non-through thread

DIY103229007-M3-Ø6mm

€0.45

6 mm diameter solid brass ball with M3 thread for assembling hollow polishing rods

M10 thread brass electrical cable clamp.

Cable clamp, cable fastener, screws, interlock button

Conical brass electrical cable clamp with cable gland - M10 thread

DIY203002-serre-cable-laiton-con

€2.80

Conical brass electrical cable clamp for light bulb socket or ceiling rose with M10 thread.

2x0.5mm electrical cable on transparent Teflon

Round electric cable

Round electrical cable with two 2x0.5mm² conductors on transparent PVC sheath and...

cable-2x-0.5mm

€2.90

Transparent two-core electrical cable with 0.5 mm² wires - length in one-metre variations

Tube and threaded accessory

White rubber cable gland - size depending on version

Passe-cable-blanc

€0.25

White rubber grommet, size according to selected version

Double-circuit toggle or rocker switch with screw terminal block

Electrical socket and switch

On / On toggle or rocker switch for in-and-out circuits screw terminal - chrome Gold

inter à levier-va-vient-12L-or

€6.60

Lamp power switch with lever knob

Cable clamp, cable fastener, screws, interlock button

Black nylon suspension clevis, anti-pull cable lock

chape-bloc-noir

€0.25

This accessory is ideal for hanging lights from your ceiling.

Threaded tube M8 length from 1 to 10 cm an accessory for luminaire

Tube and threaded accessory

Threaded tube M6 1mm pitch length from 1 to 10 cm an accessory for luminaire

DIY-058-M6

€0.23

Hollow threaded rod sold individually in M6 standard with 1mm fine pitch for fixing bulb sockets. Choose the length you need from our range, available in this advert in lengths from 1cm to 10cm.

M10 chrome washer, thickness 1mm, diameter 30-200mm

Nut and washer

M10 chrome-plated washer, thickness 1mm for light fittings - diameter 30-200mm

DIY-080

€0.79

M10 chromed washer, thickness 1mm, used for the construction of chandeliers or luminaires in chromed metal.

Sockets, multipliers, risers, adapter sockets

G9 porcelain lampholder on M10 support with threaded ring

Douille-G9-M10-bague

€4.26

This G9 lamp holder makes it easy to install small G9 light sources in luminaires.

Tube and threaded accessory

Brass hexagon nut for M12 threaded tube, 1mm pitch

Ecrou-laiton-M12

€0.60

The low brass nuts are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

Silicone colour filter

Sootylight silicone filter with white rim for GU10 or MR16 LED bulbs

Sootylight-Spot-blanc

€1.89 €1.95

Time left

Anti-glare light diffuser with a "frosted" appearance - no small dots of light visible.

Column, tube, ball, luminaire tip, suspension ring

7.5mm diameter brass ball with M4 non-through thread

DIY103229001-M4-Ø7.5mm

€0.60

7.5mm diameter solid brass ball with M4 thread for assembling hollow polishing rods

Nut and washer

low zinc-plated nut for M12 tube, 1mm pitch, 5mm thick

écrou-zinc-M12-5mm

€0.28

Low zinc-plated steel nuts are perfect for assembling light fittings and chandeliers mounted on M12 hollow rods.

2x0.5mm electrical cable on transparent Teflon with stainless steel support cable

Round electric cable

Round electrical cable 2x0.75mm² on transparent Teflon with stainless steel support cable

cable-porteur-2x0.75+1-TP

€3.95

Two-wire electrical cable, with 0.75mm² wires plus suspension cable - length in one-metre variations

0.3mm² coaxial electric cable on transparent Teflon, 1m long

Round electric cable

Coaxial electrical cable on transparent Teflon with two 0.3mm² conductors

cable-coax-0.3mm²

€2.59

Two-core coaxial electrical cable with 0.3 mm² wires - length in 1 metre increments

Ring, hook, ball joint and spring

Bulb holder rear spring ring for GU10 or MR16 spotlights

Anneau-ressort-back-gu10mr16

€0.50

Spring for holding bulbs in GU10 or MR16 spotlights

Gold-coloured, zinc-plated hexagonal nut for M10 threaded tube

Tube and threaded accessory

Gold-coloured electro-galvanised steel hexagonal nut for M10 threaded tube

Ecrou-zingué-M10-OR

€0.25

Gold-coloured, zinc-plated steel nuts are perfect for assembling luminaires and lighting fixtures mounted on M10 hollow rods.

Column, tube, ball, luminaire tip, suspension ring

12mm diameter brass ball with 1mm pitch M6 non-through thread

DIY103229017-M6-Ø12mm

€1.00

12 mm diameter solid brass ball with M6 thread for assembling hollow rods for chandeliers

MR16 porcelain lampholder with autogrip connection to bare wire

Sockets, multipliers, risers, adapter sockets

Porcelain lampholder for MR16 or G4 lamps with autogrip connection on bare wire

culot-MR16-autogrip

€0.85

MR16 base on bare wire in G4 or GU5.3 format for halogen or LED lamps.

Brass and bronze creation for luminaire

Brass washer with M10 hole flange for light fittings - diameter 15 to 50mm

DIY086-laiton-bord

€1.48

Brass washer with flange used for the construction of brass chandeliers or light fittings.

Threaded tube M12 length 3 to 10 cm an accessory for luminaire

Tube and threaded accessory

Threaded tube M12 1mm pitch length 3 to 10 cm an accessory for luminaire

DIY-058-M12

€0.30

Hollow threaded rod sold individually in M12 standard with 1mm fine pitch for fixing bulb sockets. Choose the length you need from the range available in this advert in lengths from 3cm to 10cm.

Hexagonal bichromated steel sleeve with M10 thread

Tube and threaded accessory

Hexagonal socket in dichromated steel, tapped for M10 electrical tube - Height 25mm

Manchon-M10-bichr-25mm

€1.00

This hexagonal bichromated steel sleeve is perfect for assembling M10 hollow rods.

Showing 1-48 of 2116 item(s)