A roll of 12 volt IP65 waterproof horticultural strip in a 5:1 ratio of blue LEDs to red LEDs.
The colours orange and yellow are only partially assimilated as red by plants.
The same is true of violet and indigo - these two other colours are only very slightly absorbed as residual blue.
And plants are virtually insensitive to green light because they have no photoreceptor called cryptochrome for this colour.
Horticultural LED strips are built with two types of monochromeLED: 10 blue LEDs (460nm) for growth and 50 red LEDs (630nm) for flowering. They generate a very precise spectrum and their complementary nature will ensure abundant cultivation!
The light spectrum of the LED strips is almost 98% absorbed by the plants, which means that in an optimum growing configuration very good yield results will be obtained.
It's easyto cut and connect your LED strip! Just use a pair of scissors to cut the strips every 3 LEDs, i.e. every 5 cm.
They are protected by an IP65 siliconeseal with 3M double-sided adhesive on the front.
The LED Strip is sold on its own , which means you can choose your power supply, lighting management system and any other elements you need to install your LED ribbon, which are available in the LED Strip accessories section and in part at the bottom of the product data sheet.
Product description :
Number of LEDs: 60 LEDs per metre type 5050 RGB (10 blue 50 red)
Supply voltage: 12 volts DC
Brightness: 417.9 Lux at 1 metre
Colour rendering index: 11.9 Ra (CRI)
Power factor: >0.9
Service life: > 50,000 hours
Power consumption: 14 watts/metre (70 watts for 5 metres)
Ribbon dimensions: Length 5 metres, Width 10 mm, Thickness 3mm
Circuit board: 2 tracks
Pin spacing: 5 mm
Waterproof protection: IP65 standard
Safety assurance: CE & ROHS
Weight: 120 g per metre
Our products are guaranteed for one year.
Precautions for use :
It is advisable not to look at the light for long periods, even with protective glasses.
