Self-adhesive 30-metre flexible LED strip with 60 SMD 5050 LEDs per metre, white light colour.
A translucent resin is installed on this LED strip, making it waterproof (IP65 standard) for use indoors, but also outdoors, provided the strip is protected from splashing water.
A multitude of possible uses: it can be installed as the main source of lighting for comfortable, glare-free illumination, as an indirect light, as a coving around the perimeter of your ceiling or at the edge of a suspended island in the centre of the room. You'll also be able to decorate and create an atmosphere in your shop windows, highlighting shelves, under a bar counter, on your terrace, banisters and stair treads etc...
It's easyto cut and connect! Just use a pair of scissors to cut the LED strip every 3 LEDs, i.e. every 5 cm.
The LED Strip is sold on its own , which means you can choose your power supply, lighting management system and any other elements you need to install your LED ribbon according to your requirements. These are available in the LED Strip accessories section and in part at the bottom of the product data sheet.
Product description:
3-core LED strip type 5050 SMD
Number of LEDs: 60 LEDs / metre
Light output: 450 Lumens per metre, i.e. a total of 2250 Lm for 5 metres
Single light colour: white 5200 K
Diffusion angle: over 150
Service life: 50,000 hours
Power consumption: 10.12 watts/metre (50.6 watts for 5 metres)
Ribbon dimensions: Length 30 metres; Width 10 mm; Thickness 3mm
Circuit board: 2 tracks
Pin spacing: 5 mm
Supply voltage: 12 volts DC
Waterproof protection: IP65 standard
Safety assurance: CE & ROHS
Our products come with a one-year guarantee.
This product can be used with dimmers, but only with models available in the Strip LED accessories category.
