Self-adhesive flexible LED strip with 60 LEDs per metre, type SMD 3528, white light colour.
A translucent resin is installed on this LED ribbon, making it waterproof, so it meets the IP65 standard for use indoors, but also outdoors, provided the ribbon is protected from splashing water.
A multitude of possible uses: It can be installed as the main source of lighting for comfortable, glare-free illumination, or indirectly, positioned as a cove around the perimeter of your ceiling or at the edge of a suspended island in the centre of the room. You'll also be able to decorate and create an atmosphere in your shop windows, highlighting shelves, under a bar counter, on your terrace, banisters and stair treads etc...
You can easily cut and connect your LED strip! Just use a pair of scissors to cut every 3 LEDs, i.e. every 5 cm.
The LED Strip is sold on its own , which means you can choose your power supply, lighting management system and any other elements you need to install your LED ribbon to suit your requirements. These are available in the LED Strip accessories section and in part at the bottom of the product sheet.
Product description:
3-core LED strip type 3528 SMD
Number of LEDs: 60 LEDs / metre
Light output: 300 Lumens per metre, i.e. 1500 Lumens for 5 metres
Single light colour: white 5200 K°.
Diffusion angle: over 150
Lifespan: 50,000 hours
Power consumption: 4.8 watts per metre, i.e. 24 watts for 5 metres
Ribbon dimensions: Custom length; Width 8 mm; Thickness 3 mm
Circuit board: 2 tracks
Pin spacing: 4.5 mm
Supply voltage: 12 volts DC
Waterproof protection: IP65 standard
Safety assurance: CE & ROHS
Our products come with a one-year guarantee.
This product can be used with dimmers, but only with the models available in the
available in the Strip LED accessories category
