This 30 m linear roll allows you to cut lengths as you wish,
However, you'll need to install a signalamplifier every 5 metres or less to ensure optimum power supply and duplicate the colourimetric signal and light intensity of the previous strip.
A translucent resin is installed on this LED ribbon, making it waterproof, so it meets the IP65 standard for use indoors, but also outdoors, provided the ribbon is protected from splashing water.
A multitude of possible uses: It can be installed as the main source of lighting for comfortable, glare-free illumination, or indirectly, positioned as a cove around the perimeter of your ceiling or at the edge of a suspended island in the centre of the room. You'll also be able to decorate and create an atmosphere in your shop windows, highlighting shelves, under a bar counter, on your terrace, banisters and stair treads etc...
You can easily cut and connect your LED strip! Just use a pair of scissors to cut every 3 LEDs, i.e. every 5 cm.
The LED Strip is sold on its own , which means you can choose your power supply, lighting management system and any other elements you need to install your LED ribbon according to your requirements. These are available in the LED Strip accessories section and in part at the bottom of the product sheet.
Product description :
Number of LEDs: 30 LEDs / metre
Lighting colour: RGB
Diffusion angle: over 150
Lifespan: 50000 hours
Luminous flux: 315 lumens/metre
Power consumption: 6 watts / metre
Ribbon dimensions: Length 30 metres; Width 10 mm; Thickness 3mm
Circuit board: 4 tracks
Pin spacing: 2.4 mm
Voltage: 12 volts DC
Safety assurance: CE & ROHS