5 metre self-adhesive flexible LED strip with 60 LEDs per metre, type SMD 5630, light warm white light colour.
A translucent resin is installed on this LED ribbon, making it waterproof, so it meets the IP65 standard for indoor use, but also for outdoor use, provided the ribbon is protected from splashing water.
Itcan be installed as a main source of light for comfortable, glare-free illumination, or indirectly, as a cornice around the edge of your ceiling or at the edge of a suspended island in the centre of the room. You'll also be able to decorate and create an atmosphere in your shop windows, highlighting shelves, under a bar counter, on your terrace, banisters and stair treads etc...
It's easyto cut and connect! Just use a pair of scissors to cut the LED strip every 3 LEDs, i.e. every 5 cm.
The LED Strip is sold on its own , which means you can choose your power supply, lighting management system and any other elements you need to install your LED ribbon according to your requirements. These are available in the LED Strip accessories section and in part at the bottom of the product data sheet.
Product description:
LED type 5630 SMD
Number of LEDs: 60 LEDs / metre
Light output: 969 Lumens per metre, i.e. a total of 4845 Lm for 5 metres
Single light colour: light warm white 4250 K
Diffusion angle: over 150
Service life: 50,000 hours
Power consumption: 11.96 watts/metre (59.8 watts for 5 metres)
Ribbon dimensions: Length 5 metres; Width 12 mm; Thickness 4.5mm
Circuit board: 2 tracks
Pin spacing: 5 mm
Supply voltage: 12 volts DC
Waterproof protection: IP65 standard
Safety assurance: CE & ROHS
Our products come with a one-year guarantee.
This product can be used with dimmers, but only with models available in the Strip LED accessories category.
available in the Strip LED accessories category.
