A 30 metre IP65 waterproof LED Strip with RGB colour change and an alternating warm white LED light.
A 30-metre linear roll that allows you to cut lengths as you wish, but you'll need to install a signal amplifier every 5 metres or less to ensure optimum power supply and duplicate the colour and light intensity signal of the previous strip.
A colour-changing RGB LED strip to which we've added LEDs normally reserved for traditional lighting, in other words an alternation of RGB LEDs and warm white SMD FORMAT 5050 LEDs.
Sublime pastel colours thanks to the alternating SMD 5050 LEDs on this LED ribbon, shades of colour that are impossible to achieve with a traditional RGB LED strip.
Usually used for decoration, this installation can also be used for interior lighting.
By combining it with a suitable colour controller, you can switch on the warm white LEDs and add a shade of white using the RGB LEDs.
This controller offers you the possibility of obtaining a multitude of colours ranging from warm white to pure white with the addition of the RGB LEDs.
Product description :
3-core SMD LED type 5050
Number of LEDs: 60 LEDs / metre - 30 RGB and 30 warm white
Light colour: RGB plus warm white
Diffusion angle: over 150
Lifespan: 50,000 hours
Luminous flux: 560 lumens/metre
Power consumption: 14.4 watts/metre
Ribbon dimensions: Length 30 metres; Width 12 mm; Thickness 3mm
Circuit board: 5 tracks
Pin spacing: 1.8 mm
Voltage: 12 volts DC
Protection: IP65
Safety assurance: CE & ROHS
